Site Search Results

Check out this gorgeous grainy dijon mustard dresser makeover finished by Meg Gizuk at Oliver and Rust!

General Finishes Touch Up Markers contain the famous oil-based stain that has been making wood beautiful for over 90 years.

Make your wood finishing project's grain really "POP" by layering oil & water-based products together, resulting in enhanced natural wood grain and character.

A primer is your best defense under light-colored paint.

Another technique to avoid the slight color change that sometimes occurs when applying topcoat is to add 10-15% of the paint you are using to your topcoat. This technique layers additional coats of color over your piece as well as providing the protection of a topcoat. If you don't like measuring, just add enough paint until you can see a bit of the hue in the topcoat. This method works with a brush or a spray gun.

To maintain the full-strength protection of the topcoat, DO NOT TINT YOUR FINAL COAT of topcoat.

Yes - this is not a good place to take shortcuts. GF Gel Stain gets its deep rich hue from a large number of colorants. Seal the stain with a topcoat before applying glaze to prevent "color pull."

The glaze will also glide more easily over the surface after topcoat is applied, allowing you greater control of how much color you want to use. Be sure to wait 72 hours when applying water-based finishes over oil-based finishes.

General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.

MARK YOUR CALENDARS FOR GROUNDHOG DAY. The General Finishes 2015 Contest Starts February 2nd and runs for 40 days. There are two categories to enter. Enter one or both as often as you wish here

1) WILD NIGHTS DESIGN CHALLENGE 

This years contest features thousands of dollars of prizes! 

This year's contest entries will be accepted between Monday, July 4-25. GF will post a link to the entry page on July 4th. Voting begins Tuesday, July 26 and winners will be announced the first week in August.

In this latest video, Chris Adams of General Finishes shows you 7 great tips for getting the most mileage out of a leftover can of finish after use.