Site Search Results

Accelerator is an additive that decreases dry time of General Finishes water-based products, which is helpful in humid conditions where dry time is normally extended. Available in gallons and 16 ounce sizes.

Dry time is the recommended length of time between coats of product, often called recoat time, and cure time is the length of time recommended before subjecting your finished project to daily use. The following factors can influence your dry time:

ANSWER:

Refinishing furniture in a space that is below or above the 65*-75* F range can lead to problems, and a space below 55* F is definitely too cold. One issue caused by cold temperatures is the development of dimples in the finish called "Orange Peel".

Ideal Conditions are 70 degrees F and 50% humidity. Refinishing furniture in a space that is below or above the 65-75 degrees F range can lead to problems, and a space below 55 degrees F is definitely too cold.

WATER-BASED TOPCOATS

One issue caused by cold temperatures with water-based topcoats is the development of dimples in the finish called Orange Peel.

General Finishes water-based Enduro Pre-Cat Lacquer clear-drying wood finish uses new technology in the polymer manufacturing process. This unique formula produces a smaller and smoother particle, translating into a big increase in film clarity.

Wood Turner's Finish is a water-oil urethane hybrid for use on wood turnings, bowls and other lathe-turned projects, now made with more than 50% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint.

A favorite of professional/industrial finishers and OEM manufacturing facilities, Enduro Clear 1K Poly is a premium non-yellowing water-based self-crosslinking polyurethane-fortified topcoat that delivers a clear, tough, durable, and abrasion-resistant finish.

Enduro Professional Water-Base Sanding Sealer is a clear undercoat with strong adhesion properties that forms an easily sandable foundation for your project. This fast-drying pre-catalyzed sealer is designed as a basecoat for General Finishes topcoats.

Yes. Cedar naturally contains oil, which prevents a finish from polymerizing (cross-linking or attaching together), slowing down the dry time.

Wiping with mineral spirits prior to application will help. Increase dry times as well. Regarding prep-sanding Cedar for a finish, sand to 180-220 because it is extremely soft wood.

Extender is a wetting additive used to improve flow and leveling and slow the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.

Relevant Documents