Site Search Results

We love this handmade rocking chair finished with Endurovar by Wesley Osterbur at Opa's in Elkhorn, WI.

Enduro-Var sprays beautifully if the gun is absolutely clean and does not have any other finish residue. Proper cleaning with acetone followed with hot water should purge the fluid passage. Enduro-Var itself will not cause gun failure.

Another possibility is the power of the gun. Some of the lower quality guns can overheat causing the product to cure in the gun - they need a rest once in a while if you are using them all day.

Also note that Enduro-Var ADHERES WELL only over WATER STAINS, DYE STAINS, and RAW WOOD.

We love all things Jason Bedre! One of his chairs, "Curvis Sedis II," is particularly memorable. It's got complex joinery of interlocking dovetails, as well as spline dovetails, a covered seat that's tapered to the edge, and a frame made of bent laminations.

See Jason Bedre's latest project, a custom perfume maker's desk "organ" in Mahogany. Finished in General Finishes' Satin Endurovar.

Our first concern is the use of the epoxy. Although you have may had success with this process previously, we do not recommend the use of Enduro-Var with epoxy or any oil based products. Enduro-Var works well on its own or with GFs water based finishes. There is a great possibility that future finishes can fail.

Enduro-Var II is a reformulation of our original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint and is compatible with ALL GF products.

This years contest features thousands of dollars of prizes! 

This year's contest entries will be accepted between Monday, July 4-25. GF will post a link to the entry page on July 4th. Voting begins Tuesday, July 26 and winners will be announced the first week in August.

GF recommends using the least expensive product that will provide the needed performance characteristics. We offer a range of products designed for professional spray applications and brush-on finishes for consumer use.

Compare all GF Topcoats Here

Contributed by Jeff Jewitt of Homestead Finishing Supplies

Day 1:

  • Prep sand the wood with 220-grit sandpaper.
  • Spray a wet coat of General Finishes Enduro-Var Gloss and dry for 2 hours.
  • Level sand with 320-grit sandpaper.
  • Spray a second wet coat and dry for 2 hours.
  • Lightly sand with 320-grit sandpaper.
  • Spray a third wet coat and allow to dry overnight.

Day 2:

Yes! But you must follow a few simple rules to be sure you achieve the best possible finish.