Maui Laminates
269 Papa Pl. #5
Kahului, HI 96732
United States
IMPORTANT: GF advises extra care and prep when applying any finish over laminate surfaces because they are specifically designed not to mar and therefore they are not very "sand-able", making adherence difficult.
GF advises extra care and prep when applying any finish over laminate surfaces because they are specifically designed not to mar and therefore they are not very "sand-able", making adherence difficult.
In addition to this non-permeable surface factor, General Finishes Gel Stain is an oil-based product, and it is more difficult to obtain proper drying characteristics over a dense manufactured surface such as laminate. Gel stains, as all wood stains, were formulated to go over raw wood which has an "open" surface and can absorb some of the stain.
You can apply Gel Stain to MDF, stained surfaces
A steam mop won't damage the finish film but it will force moisture into the wood between the boards or into any open scratched areas on the surface of the board. This could cause a de-lamination of the finish from the wood or damage to the wood itself. We recommend a commercial floor cleaner such as Bona floor cleaning system.
We love all things Jason Bedre! One of his chairs, "Curvis Sedis II," is particularly memorable. It's got complex joinery of interlocking dovetails, as well as spline dovetails, a covered seat that's tapered to the edge, and a frame made of bent laminations.
Fill Stick and Touch Up Marker Assortment Pack. Pigmented wax sticks are used to repair and cover scratches, nail holes, nicks and other minor imperfections in wood, furniture, cabinets and laminates. Colors may be mixed to create custom color matches.
Haze (the technical term is blush) is caused by too many coats applied too quickly. A recoat time of 12 hours is not enough dry time when applying over an EXISTING finish. To remove the blush or haze, you can either wipe the area with a strong solvent, like xylene or lacquer thinner, or you can try sanding out the haze and then reapply the topcoat.
Gravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal.
If working with older paint, use a paint mixing attachment on a drill to reincorporate the solids. If the solids dissolve and the clumps smooth out after mixing from the bottom, the product is in good condition.
If your water based product has large chunks that cannot be incorporated by stirring, the product has frozen and can no longer be used.
General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.
Enduro Water-Based Conversion Varnish
Enduro Water-Based Tintable 2K White Poly
Enduro Water-Based Pro Series White Polyurethane
Enduro Water-Based Tintable 2K Clear Poly
Hard Wax Oil & Hardener
Gel Stains
Water-Based Wood Stain
Pro Image Flooring Topcoat
Jen Poly Brushes
Stir Stix
Ultraflex Softback Sanding Sponge
