Site Search Results

General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.

GF recommends using the least expensive product that will provide the needed performance characteristics. We offer a range of products designed for professional spray applications and brush-on finishes for consumer use.

Compare all GF Topcoats Here

A high-performance 2K coating has a base specifically formulated to be catalyzed with Isocyanates to crosslink the polymer fully. This catalyst provides superior performance over 1 K coatings that have been hardened with PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K; General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world.

The hardness properties of a wood finish are formulated around the objectives of use. A hard finish is desirable on projects that get heavy wear such as kitchen cabinets or table tops.

But in other situations, such as an outdoor topcoat, a desired property of the finish is elongation, which allows the topcoat to expand and contract through different extremes of temperature.

Gravity can cause some solids to settle on the bottom of the can and slight separation on the top. This is normal.

If working with older paint, use a paint mixing attachment on a drill to reincorporate the solids. If the solids dissolve and the clumps smooth out after mixing from the bottom, the product is in good condition. 

If your water based product has large chunks that cannot be incorporated by stirring, the product has frozen and can no longer be used.

Superior water-based Enduro Tintable 2K Polys made in Wisconsin for professional, industrial, and OEM users. We hope you try it out; you’ll like it.

General Finishes industrial/professional Enduro Water-based Tintable 2K coatings are ideally qualified for OEM (Original Equipment Manufacturing) production, which requires functional properties that are essential to the performance and durability of industrial, transportation, and durable consumer products. In addition to our line of stock Enduro finishes, General Finishes can custom-make coatings for your specific OEM objectives.

We recommend an oil-based finish such as General Finishes Arm-R-Seal.

Oily woods can be tricky with any topcoat. The high oil content affects the drying process of the finish coats and Padauk has a very high oil content. Sometimes oily woods dry fine and sometimes they take weeks.