Site Search Results

Enduro Professional Water-Base Sanding Sealer is a clear undercoat with strong adhesion properties that forms an easily sandable foundation for your project. This fast-drying pre-catalyzed sealer is designed as a basecoat for General Finishes topcoats.

The term for a cloudy, milky appearance in the finish is Blush. There are three causes:

     1. The most common reason is an incompatible stain. For example, using a water-based topcoat over an oil-based based stain. When the top coat is applied, the oil in the stain seeps up through the finish and reacts with the acrylic causing a chemical blush.

ANSWER:

It depends! Read on, or watch this GF video demonstration: http://youtu.be/torOAQy91q4

*Here are the main questions to ask yourself:

Flat Out Flat is a self-crosslinking water-based topcoat that mimics the lustrous look and feel of wax. The increased matting agents used to create "flat look" cause this wood finish to have less clarity, show fingerprints more and provide slightly less durability than High Performance.

General Finishes Enduro Sanding Sealer

There are four benefits to using sanding sealer as the first seal coat prior to topcoat

The most critical part of finishing a piece of furniture happens before you open a can of stain or paint - it starts with the sanding. Sanding is critical to creating a smooth surface. Use the following sanding sequences for new wood:

PAINT

For wood that is going to be painted, use 120-grit, followed by 150-grit.

All bright white paint will yellow slightly with time, even without topcoat. You have probably tried to touch up white woodwork in your home after several years and noticed that the new paint is brighter.

But white and light paints can react if clear coated with a waterbased finish; water-based topcoats are reactive and may draw out substances in the wood such as tannins, dyes or unknown substances in existing finishes causing the topcoat to yellow. This is an industry-wide issue and can happen right away, years later or never.

General Finishes Enduro Professional OEM Coatings

General Finishes industrial/professional Enduro Water-based Tintable 2K coatings are ideally qualified for OEM (Original Equipment Manufacturing) production, which requires functional properties that are essential to the performance and durability of industrial, transportation, and durable consumer products. In addition to our line of stock Enduro finishes, General Finishes can custom-make coatings for your specific OEM objectives.

Yes. All stains need a top coat. Think of stain as the color and top coat as the sealer and protectant. Discover the best topcoat for your gel stain.

Relevant Documents