Site Search Results

Keep your spray gun operating at peak performance with General Finishes Brush & Gun Cleaner.

The material used to clean your spray gun depends on the type and brand of finish used.

Extender is a wetting additive used to improve flow and leveling and slow the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.

Accelerator is an additive that decreases dry time of General Finishes water-based products, which is helpful in humid conditions where dry time is normally extended. Available in gallons and 16 ounce sizes.

Enduro-Var sprays beautifully if the gun is absolutely clean and does not have any other finish residue. Proper cleaning with acetone followed with hot water should purge the fluid passage. Enduro-Var itself will not cause gun failure.

Another possibility is the power of the gun. Some of the lower quality guns can overheat causing the product to cure in the gun - they need a rest once in a while if you are using them all day.

Also note that Enduro-Var ADHERES WELL only over WATER STAINS, DYE STAINS, and RAW WOOD.

As The Distressed Fleur De Lis commented, "#GeneralFinishes Milk Paint can be used in a sprayer so I thought I would give it a try.

General Finishes Professional Enduro White Undercoat is similar to General Finishes Sanding Sealer with the addition of white colorant to provide a primer undercoat for white/off-white wood finishes.

ANSWER: For ideal results, GF recommends applying finish with a spray gun and putting your project on a rotating lazy susan.

General Finishes is proud and honored to be featured in the August 2015 issue of Woodworker's Journal.  Michael Dresdner, a nationally known finishing expert, highlights the advantagous of GF water based products in his article (below) tit

Relevant Documents