Stain Glide Additive for Pro Floor Stain

General Finishes Stain Glide is a water-based additive for use with General Finishes Pro Floor Stain. Add Stain Glide to Pro Floor Stain to extend the open time and make buffing easier in hot, dry conditions.


 

Find A Store
General Finishes Stain Glide Additive for Pro Floor Stain, Pint Bottle

Instructions

How To Use General Finishes Stain Glide

How to Use General Finishes Stain Glide Additive for Pro Floor Stain

  1. Always do a test panel of your entire finishing schedule before proceeding to ensure the color is what you want. Stain Glide is best used when working with dark stain colors. Using a 20% mix will cause some loss of color when used with light stains. 
  2. If mixing General Finishes Pro Floor Stain colors, do so before adding Stain Glide.
  3. Stir General Finishes Stain Glide to reincorporate solids that have settled to the bottom of the bottle.
  4. Mix 10-20% (12-24 oz.) Stain Glide to 1 gallon of Pro Floor Stain. Do not exceed 20%. Stir, DO NOT SHAKE. Stain Glide will maximize flow and leveling, reduce lapmarks, and extend open time, which is helpful in hot, dry climates. 

Cleanup of Water Based Products

Application tools and materials containing water-based products can be cleaned with soap and water immediately after use.

Product Spills
Spills may be able to be removed from fabric and carpet if cleaned immediately with soap and water.

Storage of Pro Flooring Products

Life of Product
Water-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the container. The life of the product may be extended with proper care and storage.

Storage Tips
The following best practices will increase the life of your product:

  1. Keep the containers closed after decanting what you need.
  2. Store in moderate temperatures. Avoid temperatures below 50*F/10*C or above 80*F/26*C. Frozen and heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next to something warm like a water heater or furnace.
  3. Decant leftovers to a smaller container when the finish is almost used up. Alternative storage containers for water-based products are plastic FIFO bottles or glass bottles. Do not fill metal-lidded containers completely to prevent them from rusting.

The following water-based product mixtures can be stored:

The following product mixtures should NOT be stored:

  • Any water-based product thinned with tap water. Water often contains bacteria that will adversely affect stored paint.

Warnings and Warranties

Limited Warranty
General Finishes products must be tested to your complete satisfaction before using, including compatibility with other manufacturers products. General Finishes will be responsible only for the cost of our products and will not be responsible for any costs such as labor, damage, or replacement costs.

Contamination and Compatibility
Our finishes are engineered as a system and are compatible with each other. General Finishes cannot guarantee an ideal refinish when applying our products on top of or combined with another company's products or over surfaces that have been in contact with waxes, polishes or sprays containing contaminants such as silicone. Test for adherence and aesthetics before beginning. 

Danger: Contents are COMBUSTIBLE. Keep away from heat and open flame. Application materials or other waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after use, place rags, steel wool or waste in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations.

CAUTION: Contains ALIPHATIC HYDROCARBONS. VAPOR HARMFUL. Use only with adequate ventilation. DELAYED EFFECTS FROM LONG-TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating & inhaling the contents can be harmful or fatal.

Warning
If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto www.epa.gov/lead.

Do not swallow; first aid: drink water to dilute product. May cause eye and skin irritation; first aid: flush eyes thoroughly with water.

FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, do not induce vomiting. Get medical attention immediately. 

Warning
This product contains a chemical known to the State Of California to cause cancer and birth defects. Do not swallow; first aid: drink water to dilute product. May cause eye or skin irritation; first aid: flush eyes thoroughly with water.

Design Center

Videos

FAQs

How is a flooring topcoat different than a furniture or cabinet finish?

Three features differentiate flooring topcoats:

  1. General Finishes flooring topcoats, Pro Image and Pro Shield are fortified with significantly more urethane to increase durability.
  2. The slip rate of flooring topcoats is higher to improve floor safety and reduce the likelihood of slipping: approximately a 5.7 rating. For example, someone in socks is less likely to slip on a flooring finish, or a basketball player is less likely to slip on a good profressional floor finish. Cabinet finishes have a much lower (negative) slip rate because folks want a silky, smooth finish on a cabinet or furniture; approximately a -.4 rating.
  3. A floor finish has more elongation - the finish stretches to provide flexibility over expanding and contracting woods.

 

Related Products

Relevant Videos

Is it necessary to use Pro Sealer every time I finish a wood floor?

General Finishes Pro Image Topcoat or Pro Shield Topcoat can be applied directly to the stain without a sealer. In cases of species like White Oak top coats can pull tannin from the wood leaving an undesirable color affect. Many closed grain woods such as maple, walnut, and cherry may only require one seal coat and two finish coats. Most open grain woods such as the oaks and ash will need two seal coats to increase the build of the finish and improve the final result. If in doubt, put down a coat of sealer.

Relevant Videos

Will a steam mop damage Pro Image or Pro Shield finish?

A steam mop won't damage the finish film but it will force moisture into the wood between the boards or into any open scratched areas on the surface of the board. This could cause a delamination of the finish from the wood or damage to the wood itself. We recommend a commerical floor cleaner such as Bona floor cleaning system.

Related Products

Relevant Videos