*Is Topcoat Required Between Gel Stain and Water Based Glaze Effects?

Yes - this is not a good place to take shortcuts. GF Gel Stain gets its deep rich hue from a large number of colorants. Seal the stain with a topcoat before applying glaze to prevent "color pull."

The glaze will also glide more easily over the surface after topcoat is applied, allowing you greater control of how much color you want to use. Be sure to wait 72 hours when applying water-based finishes over oil-based finishes.

Here is a sample finish schedule:

1. Prep sand and clean
2. Apply stain
3. Apply a layer of topcoat to prevent color bleed thru and make glazing easier
4. Apply Glaze Effects
5. Apply 2-3 coats of topcoat to protect the entire project