America's Leading Manufacturer of Innovative Water-Based Wood Finishes

Site Search Results

Do I need to wet sand Wood Turners Finish?

Wood Turners Finish

Wood Turner's Finish does not need wet sanding. If feel the need for more sheen, dry polish with Merka Abralon 1500-4000 grit or Micro Mesh 4000-8000.

*How Do I Buff Out High Performance Water Based Topcoat to a High Gloss?

High Performance Water Based Top Coat Satin Finishing Wax Buffing Out the Final Coat of Finish

There are several techniques by Jeff Jewitt of Homestead Finishing Products:

DRY BUFF WITH MIRKA ROYAL MICRO PAPER

Using Mirka Royal Micro sandpaper, always start with 1500-grit sandpaper. Begin with a small area, make 2-3 passes, then evaluate results. Go to a heavier grit if surface irregularities are not fully removed. Finish with 1500-grit paper.

Exterior 450 Water-Based Clear Outdoor Topcoat

General Finishes Satin Water Based Topcoat Exterior 450, Gallon

Exterior 450 Topcoat is a tintable clear-drying low VOC finish suitable for vertical exterior surfaces, such as fences, patio furniture, garage doors and entrance doors. It is not recommended as a deck finish.

Search Filters

Type of Content

Application Method