Site Search Results

Finish sanding is the process of sanding between or before the final coats of topcoat. There are several options.

Be careful about just using numbers. For instance, the 220 grit sanding PAD is equivalent to 400 grit SANDPAPER. Sanding pads from different brands have similar names but different grits. Also a note on sanding pads - we like to abrade new ones a bit on raw wood and not use them straight out of the box. Used 220 sanding pads are perfect for that final sand before topcoat.

There are several techniques by Jeff Jewitt of Homestead Finishing Products:

DRY BUFF WITH MIRKA ROYAL MICRO PAPER

Using Mirka Royal Micro sandpaper, always start with 1500-grit sandpaper. Begin with a small area, make 2-3 passes, then evaluate results. Go to a heavier grit if surface irregularities are not fully removed. Finish with 1500-grit paper.

No, because the particles can become embedded and rust. Some alternatives are Klingspor Synthetic Wool and Meka Mirlon 1500 synthetic wool.

Steel wool is still an acceptable option for oil-based finishes. GF recommends using "oil-free" 0000 wool from Liberon because it doesn't shred as easy as hardware store brands.

Rubbing or Buffing out a Finish:

Wood Turner's Finish does not need wet sanding. If feel the need for more sheen, dry polish with Merka Abralon 1500-4000 grit or Micro Mesh 4000-8000.

Never use steel wool with water based finishes because the particles can become embedded into your project and rust. Klingspor Synthetic Wool and Mera MIrlon 1500 synthetic wool are great alternatives.

Steel Wool is still an acceptable option for oil based finishes. Liberon 0000 Steel Wool is a good choice, as it does not shred as easily as the hardware store brands.