Contributed by Jeff Jewitt of Homestead Finishing Supplies
Day 1:
- Prep sand the wood with 220-grit sandpaper.
- Spray a wet coat of General Finishes Enduro-Var Gloss and dry for 2 hours.
- Level sand with 320-grit sandpaper.
- Spray a second wet coat and dry for 2 hours.
- Lightly sand with 320-grit sandpaper.
- Spray a third wet coat and allow to dry overnight.
Day 2:
- Level sand with 320-grit sandpaper.
- Wipe down with water mixed with 5% Denatured Alcohol.
- Spray a fourth wet coat 2-3 mils thick and dry 1 hour.
- Spray 3 more coats, 1 hour between coats, for a total of 4 coats the second day.
Let your project dry 1 week, then:
- Level sand dry with Mirka P800.
- Dry sand with Mirka P1200.
- Dry sand with 2000-grit Mirka Abralon.
Note: Do not use any lubricants of any type for sanding.
Final:
- Buff 3M Finesse-It Material on with foam buffing pad to high gloss.