How do I apply Milk Paint over Laminate?

APPLYING GENERAL FINISHES MILK PAINT TO LAMINATE

IMPORTANT: GF advises extra care and prep when applying any finish over laminate surfaces because they are specifically designed not to mar and therefore they are not very "sand-able", making adherence difficult.

1. Power clean by scrubbing with a solution of water and a strong detergent such as Dawn or Spic & Span, using a Scotch-Brite pad. Rinse thoroughly.
2. Then follow with a second scrubbing with a 50:50 mix of denatured alcohol and water, also using a Scotch-Brite pad. Let dry completely.
3. Sand with a power sander.150-grit followed by 180 grit sandpaper. (some users report using 220 grit sandpaper). Wipe off the dust.
4. Apply XIM 400 White Primer Sealer Bonder(follow label applications instructions but let dry longer, 12 hours or overnight.)
5. Apply 2 coats of Milk Paint allowing triple drying time.