Enduro Water Based Stain Blocker Primer
Hard Wax Oil & Hardener
Gel Stains
Water-Based Wood Stain
Pro Image Flooring Topcoat
Jen Poly Brushes
Stir Stix
Ultraflex Softback Sanding Sponge
Enduro Professional Water-Based Tintable 2K Clear Poly
|
Enduro Professional Water-Based Tintable 2K White Poly
|
Enduro Professional Water-Based Conversion Varnish
|
Enduro Professional Water-Based Clear Poly
|
Enduro Professional Water-Based White Poly
|
Enduro Professional Water-Based Black Poly
|
Enduro Water-Based Pro Series Clear Polyurethane
|
Enduro Water-Based Pro Series White Polyurethane
|
Enduro Professional Water-Based Pre-Cat Lacquer
|
| Basic Features | Basic Features | |||||||
|---|---|---|---|---|---|---|---|---|
| Product Colors | Product Colors | |||||||
| White, Tintable | Water White in can (dries clear) | Water White in can (dries clear) | White | Black | Water White in can (dries clear) | |||
| Base Type | Base Type | |||||||
| Water | Water | Water | Water | Water | Water | Water | Water | Water |
| Ambering | Ambering | |||||||
| No | No | No | No | No | No | |||
| Sheen | Sheen | |||||||
|
Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (90+) |
Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (85+) |
Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+) |
Dead Flat (<5), Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+) |
Flat (10 or less), Satin (25-35), Semi-Gloss (50-60) |
Satin (25-35), Semi-Gloss (50-60) |
Flat (10), Satin (30), Semi-Gloss (55) |
Flat (10), Satin (30), Semi-Gloss (55) |
Flat (10 or less), Satin (25-35), Semi-Gloss (50-60), Gloss (80+) |
| Interior or Exterior | Interior or Exterior | |||||||
| Interior/Exterior | Interior/Exterior | Interior/Exterior | Interior only | Interior only | Interior only | Interior only | Interior only | Interior only |
| Tintable | Tintable | |||||||
| Yes | Yes | No | Yes | Yes | No | Yes | Yes | Yes, but not recommended. |
| Type | Type | |||||||
| Urethane | Urethane | Urethane/Acrylic Blend | Urethane/Acrylic Blend | Urethane/Acrylic Blend | Urethane/Acrylic Blend | Urethane/Acrylic Blend | Urethane/Acrylic Blend | Self-crosslinking Acrylic |
| Suggested Use | Suggested Use | |||||||
|
New or remodeled cabinets, furniture, woodwork, pre-primed steel, fiberglass, and exterior projects. If tinting and applying over a painted surface, be sure to prime and test before completing your entire project. |
Interior or exterior application: raw wood, stained wood, cabinets, trim, doors, furniture, table tops & bar tops, fiberglass & pre-primed steel. If using over painted surfaces, especially white, prime and test first before completing your project. |
Interior cabinets, trim, doors and furniture. Use over raw, stained or primed wood substrates. |
Interior cabinets, trim, doors and furniture. Use over raw or primed wood substrates. |
|||||
| Pro Tips | Pro Tips | |||||||
|
Force Cure: Allow product to flash for 10 minutes at ambient temperature. INFRARED LAMP / OVEN: Heat surface to 105F/41C. Allow to cool before sanding. Allow a minimum of 30 minutes |
Force Dry: Allow product to flash for 10 minutes at ambient temperature. |
|||||||
| Contents | Contents | |||||||
| Can Sizes | Can Sizes | |||||||
| Gallons, 5 Gallon pails | Gallons, 5 Gallon pails | Gallons, 5 Gallon pails | Gallons, 5 Gallon pails, 55 Gallon drums | Quarts, Gallons, 5 Gallon pails, 55 Gallon drums | Gallons, 5 Gallon pails | Gallons, 5 Gallon pails, 55 Gallon drums | Gallons, 5 Gallon pails, 55 Gallon drums | Gallons, 5 Gallon pails |
| Coverage | Coverage | |||||||
| 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon | 450 sq.ft. (41.81 m²) per Gallon |
| Application | Application | |||||||
| Coats | Coats | |||||||
| 2 - 3 coats | 2 - 3 coats | 3 coats | 3 coats | 3 coats | 3 coats | 3 coats | ||
| Application Method | Application Method | |||||||
| Spray | Spray | Spray | Spray | Spray | Spray | Brush, Roll, Spray | Brush, Roll, Spray | Spray |
| Brushable | Brushable | |||||||
| No | No | No | No | No | No | Yes | Yes | No |
| Usable over existing finishes | Usable over existing finishes | |||||||
| Yes | Yes | Yes | Yes | Yes - see product page application instructions. | Yes - see product page application instructions. | Yes - see product page application instructions. | Yes - see product page application instructions. | Yes |
| Sprayable | Sprayable | |||||||
| Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | |
| Spray Tip Sizes | Spray Tip Sizes | |||||||
| HVLP 1.1mm-1.3mm | HVLP 1.1mm-1.3mm | HVLP 1.1mm-1.3mm | HVLP 1.1mm-1.3mm | HVLP 1.3mm-1.5mm | HVLP 1.3mm-1.5mm | HVLP 1.1mm-1.5mm | HVLP 1.3mm-1.5mm | HVLP 1.1mm-1.3mm |
| Air-Assist Airless | Air-Assist Airless | |||||||
| 375 PSI pump, 20 PSI assist air, .011”-.013” tip |
375 PSI pump, 20 PSI assist air, .011”-.013” tip or 409 tip. 1000 psi fluid with 18 psi air |
375 PSI pump, 20 PSI assist air, .011"-.013" tip | 300 - 400 PSI pump, 20 PSI assist air, .011” - .013” tip | 1000-1200 PSI pump, 20 PSI assist air, .011" tip | ||||
| Airless | Airless | |||||||
| Fine Finish .007” - .011” |
Fine Finish .007” - .011” or Airless .308 FFLP Tip at low pressure |
Fine Finish .007" - .011" | Fine Finish .007” - .011” | Fine Finish .007 - .011" | ||||
| Topcoat Required | Topcoat Required | |||||||
| Self-Sealing | Self-Sealing | Self-Sealing | Self-Sealing | Self-Sealing | Self-Sealing | N/A | Self-Sealing | Self-Sealing |
| Product | Product | |||||||
|
Enduro Professional Water-Based Tintable 2K Clear Poly
|
Enduro Professional Water-Based Tintable 2K White Poly
|
Enduro Professional Water-Based Conversion Varnish
|
Enduro Professional Water-Based Clear Poly
|
Enduro Professional Water-Based White Poly
|
Enduro Professional Water-Based Black Poly
|
Enduro Water-Based Pro Series Clear Polyurethane
|
Enduro Water-Based Pro Series White Polyurethane
|
Enduro Professional Water-Based Pre-Cat Lacquer
|
| Dry Time | Dry Time | |||||||
| Dry Time - Touch | Dry Time - Touch | |||||||
| 30+ min. | 30+ min. | 30+ min. | 30+ min. | 30+ min. | 30+ min. | 30+ min. | 30+ min. | 10+ min. |
| Dry Time - Recoat | Dry Time - Recoat | |||||||
| 1+ hr | 1+ hr | 1+ hr | 1+ hr | 1+ hr | 1+ hr | 1+ hr | 1+ hr | 1+ hr |
| Dry Time - Light Use | Dry Time - Light Use | |||||||
| N/A | 72 hr | 7-10 days | 7-10 days | 7-10 days | 7-10 days | N/A | 7-10 days | |
| Dry Time - Cure | Dry Time - Cure | |||||||
| 5 days | 5 days | 7 days | 21 days | 21 days | 21 days | 21 days | 21 days | 21 days |
| Dry Time - Recoat - Applied Over Oil Based Product | Dry Time - Recoat - Applied Over Oil Based Product | |||||||
| 72+ hr | 72+ hr | |||||||
| Durability | Durability | |||||||
| Durability (Highest, High, Medium, Low) | Durability (Highest, High, Medium, Low) | |||||||
| Highest | Highest | High | High | High | High | Medium | Medium | Medium |
| Hardness (Koenig #) | Hardness (Koenig #) | |||||||
| 125 | 125 | 95 | 100 | 59 | 62 | 104 | 130 | |
| Wear (Taber #) | Wear (Taber #) | |||||||
| 35.0 mg loss | 35.0 mg loss | 20.4 mg loss | 35.7 mg loss | 109.8 mg loss | 105.4 mg loss | 88.0 mg loss | 94.2 mg loss | |
| Water | Water | |||||||
| 5 | 5 | 5 | 5 | 5 | 5 | 4 | 5 | 5 |
| Chemical | Chemical | |||||||
| 101 | 101 | 101 | 98 | 88 | 92 | 91 | 101 | 89 |
| Technical Data | Technical Data | |||||||
| Viscosity | Viscosity | |||||||
| Thick | Thick | Medium | Medium | Medium | Medium | Medium | Medium | Medium |
| Viscosity (cPs) | Viscosity (cPs) | |||||||
| 1000-1500 | 1000-1500 | 350-450 | 350-450 | 600-800 | 600-800 | 600-800 | 600-800 | 350-450 |
| Solids by Weight and Volume | Solids by Weight and Volume | |||||||
|
Solids by Weight Flat: 33% Satin: 30% Semi-Gloss: 28% Gloss: 28% Solids by Volume Flat: 30% Satin: 28% Semi-Gloss: 26.5% Gloss: 26% |
Solids by weight Flat: 46% Satin: 44% Semi-Gloss: 43% Gloss: 42% Solids by Volume Flat: 35% Satin: 32% Semi-Gloss: 31% Gloss: 30% |
Solids by Weight Flat: 29% Satin: 28% Semi-Gloss: 28% Gloss: 28% Solids by Volume Flat: 27% Satin: 26% Semi-Gloss: 27% Gloss: 27% |
Solids by Weight Dead Flat: 33% Flat: 33% Satin: 29% Semi-Gloss: 28% Gloss: 29% Solids by Volume Dead Flat 35% Flat: 30% Satin: 26% Semi-Gloss: 25% Gloss: 26% |
Solids by Weight Flat: 45% Satin: 45% Semi-Gloss: 44% Solids by Volume Flat: 33% Satin: 33% Semi-Gloss: 32% |
Solids by Weight Satin: 31% Semi-Gloss: 30% Solids by Volume Satin: 28% Semi-Gloss: 28% |
30% - 32%, dependent on sheen |
Volume Solids: 32 - 35% dependent on sheen Weight Solids: 43 -47% dependent on sheen |
Solids by Weight Flat: 26% Satin: 24% Semi-Gloss: 24% Gloss: 24% Solids by Volume Flat: 24% Satin: 23% Semi-Gloss: 23% Gloss: 23% |
| Weight Solids | Weight Solids | |||||||
| 29% | 45% | |||||||
| VOC | VOC | |||||||
|
US VOC Flat: < 215 g/L Satin: < 215 g/L Semi-Gloss: < 200 g/L Gloss: < 215 g/L |
US VOC Flat: < 210 g/L Satin: < 210 g/L Semi-Gloss: < 210 g/L Gloss: < 210 g/L |
US VOC Dead Flat: < 250 g/L Flat: < 250 g/L Satin: < 250 g/L Semi-Gloss: < 250 g/L Gloss: < 250 g/L |
US VOC Flat: <250 g/L Satin: <250 g/L Semi-Gloss: <150 g/L |
US VOC Satin: 255 g/L Semi-Gloss: 240.720 g/L |
All sheens under 200 g/L. | All sheens under 150 g/L. |
US VOC Flat: < 250 g/L Satin: < 250 g/L Semi-Gloss: < 250 g/L Gloss: < 250 g/L |
|
|
Enduro Professional Water-Based Tintable 2K Clear Poly
|
Enduro Professional Water-Based Tintable 2K White Poly
|
Enduro Professional Water-Based Conversion Varnish
|
Enduro Professional Water-Based Clear Poly
|
Enduro Professional Water-Based White Poly
|
Enduro Professional Water-Based Black Poly
|
Enduro Water-Based Pro Series Clear Polyurethane
|
Enduro Water-Based Pro Series White Polyurethane
|
Enduro Professional Water-Based Pre-Cat Lacquer
|
| View Product | View Product | View Product | View Product | View Product | View Product | View Product | View Product | View Product |
America's Leading Manufacturer of Innovative Water-Based Wood Finishes
