*Why or When Should I Use a Dye Stain?*

There are several reasons to choose Dye Stain. Here are a few.

1. Use dye stain when you have beautiful wood grain, pattern or burl and you want to show it off! GF Dye Stains are like ink and penetrate deep into the wood grain, revealing the figure of the wood with beautiful transparency.
2. They are a great way to layer and intensify color. We often use a yellow or amber dye stain under another type of darker stain, such as Yellow Dye Stain under Java Gel Stain. The combined colors create a lovely depth and glow.
3. Dye stains create a brilliantly colored project while maintaining the look of the wood. They come in a range of colors from traditional wood tones to brilliant primaries and can be applied to raw wood or combined with clear coats to make a toner.

Look at this piece that Jilian Moncada of ReFind Design by Coco Clare shared. When Jilian discovered this elegant burled wood under the old finish, she wrote and asked what to use - we recommended dye stain and just look at her result!

We do not recommend the use of a wood pre-conditioner with dye stains. It is a matter of personal preference, but conditioners diminish color saturation, defeating the purpose of dye stains.

GRAIN RAISE: Water-based dye stains pop the wood grain more than solvent-based versions, but like all water-based stain products, it will raise the grain of the wood a bit. You can reduce this effect by raising the grain before applying dye stain. First, dampen the sanded surface with a cloth moistened with distilled water (tap water can contain minerals that may affect the finish). Let the surface dry and then sand lightly with the grain using 220-grit sandpaper. Never over-sand before applying any stain, as you may seal the surface so much that stain will not be able to properly penetrate. Alternatively, grain raise can easily be knocked down when finish sanding the first layer of topcoat.

CAUTION: Test the color in a hidden area before you begin your project. Once you use a Dye Stain, that is the color you are going to get. Apply liberally and evenly with a foam applicator and wipe off any excess immediately. There won't be much to wipe away; it penetrates fast.

Please share your completed Dye Stain projects on our Facebook page and in our Design Center.