Site Search Results

Arm-R-Seal Urethane Wipe-On Topcoat

General Finishes Satin Arm-R-Seal Oil Based Topcoat, Quart

Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, this ambering finish penetrates to provide deep-down protection for that "natural" look.

Seal-A-Cell Oil Based Sealer

General Finishes Clear Oil Based Seal-a-Cell, Quart

An unusual combination of oils, urethanes, and wax, Seal-A-Cell Clear has served craftsman for decades as the best wipe-on clear coat to get that "natural" look on beautiful woods. The oils penetrate deep into the wood to highlight the figure of the wood, and the urethane ensures durability.

Can oil based urethane topcoats be tinted with oil stain for use as a toner?

General Finishes Arm-R-Seal Urethane Top Coat

Yes, they can, but be sure to stay within a manufacturer's finishing system and not mix product from different brands.

In General Finishes line you can add up to 20% Gel Stain or Oil Base Stain to Arm-R-Seal to deepen the color for toning purposes.
Simply stir the stain into the topcoat.
Keep stirring during application as solids will settle very quickly when mixed into an oil urethane-based finish.
Be sure to test in a hidden area before proceeding with your entire project.

Which GF Top Coat Should I Use?

Post Date

Tue, 12/30/2014 - 12:00

ANSWER:

It depends! Read on, or watch this GF video demonstration: http://youtu.be/torOAQy91q4

*Here are the main questions to ask yourself:

Does Gel Stain Need a Top Coat?

sofa table finished with gel stain up against a wall

Post Date

Wed, 12/10/2014 - 12:00

Yes. All stains need a top coat. Think of stain as the color and top coat as the sealer and protectant. Discover the best topcoat for your gel stain.

Organic Wood Table Finished with General Finishes Arm-R-Seal Urethane Topcoat

raw edge table refinished with general finishes arm-r-seal

Post Date

Mon, 11/18/2013 - 12:00

This organic, original wood table was finished with General Finishes

*Why is Arm-R-Seal Blotching Over an Oil Based Stain on a Table I am Refinishing?

Arm-R-Seal Repairing & Trouble Shooting Oil Based Finishes

The problem areas on your table are probably caused by surface contamination from oils, waxes or cleaning products used over the years.

Contaminants from dusting sprays that contain silicone will also impact the appearance and adherence of a finish - silicone is almost impossible to remove. Oil soaps and wax can also cause adhesion failures. This may be why the finish is performing differently on the leaves vs the table top. Adhesion failure is often more obvious in the deepest patterns of grain because the contamination is driven deep into the grain.

Gel Topcoat: Oil Based Urethane

General Finishes Satin Oil Based Gel Topcoat, Quart

Gel Satin Topcoat has been a long-time favorite finish of woodworkers, with a heavy-duty oil-and-urethane base that produces a beautiful, hand-rubbed look. Gel Satin Topcoat has a thick consistency, so there are no drips, or runs.

*Can An Oil Based Topcoat Such as Arm-R-Seal Be Thinned?

Arm-R-Seal

Although Arm-R-Seal rarely needs thinning because of its low viscosity, it can be thinned with up to 10% mineral spirits - more than that may thin the solids content too much.

Thinned Arm-R-Seal will be diluted but can be stored without risk of separation.