Enduro-Var Water Based Polyurethane Varnish

Endurovar From General Finishes

Enduro-Var is a self crosslinking polyurethane that looks more like an oil varnish than a water coating. It ambers slightly, is our most durable coating, is highly water resistant, and is both sprayable and brushable. Suitable for cabinets and millwork. Enduro-Var ADHERES WELL only over WATER STAINS, DYE STAINS, and RAW WOOD. It will adhere over an oil stain ONLY IF the stain is completely dry (minimum 4 days drying). Use Enduro-Var over any other surfaces at your own risk. Available in Flat, Satin, Semi-gloss and Gloss.


Colors: Warm amber tone

Sheen: Flat, satin, semi-gloss and gloss 

Recoat/Dry Time: 4 hours

Coats Recommended: 3

Cure Time: 21 days

Cleanup: General clean-up with soap and warm water recommended. Rinse thoroughly with clean water. For best results, clean all equipment with General Finishes Brush and Gun Cleaner. 

Coverage: 150 sq ft/qt

Recommended Use: Interior use only, Wood applications

Topcoat Recommendation: This product should be used alone; do not use with sanding sealer or any oil based finishes.

VOC: < 275g/l (2.28 lb/gal)

General Finishes products should be tested to your complete satisfaction before using. General Finishes will not be responsible for any failure if our products are used in conjunction with other brands of finishes. We do not test General Finishes products with those of another manufacturer and will not accept liability if there is a compatibility issue.

WATER SPILLS AND DAILY USE: Clean water spills up as they occur during regular use and protect from heat. Although General Finishes products are water resistant, they are not impervious to water. Surfaces will not be damaged by spilled water so long as it is cleaned up promptly. We recommend using coasters to protect your wood from standing water and pot holders to protect from heat.


Technical Data Sheets
Safety Data Sheets