The most critical part of finishing a piece of furniture happens before you open a can of stain or paint - it starts with the sanding. Sanding is critical to creating a smooth surface. Use the following sanding sequences for new wood:
For wood that is going to be painted, use 120-grit, followed by 150-grit.
There are three ways:
It is normal to see a bit of stain on the brush when applying the first coat of topcoat. Topcoats often pull a bit of color on the first pass, but good preparation will minimize this.
To prepare open grains woods such as raw Oak for a water-based stain, we recommend sanding with 180-grit followed by no more than 220-grit sandpaper.
Rockler Woodworking and Hardware - Ontario
4320 E. Mills Circle Rd.
Suite G
Ontario, CA 91764
United States
General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.
Enduro Water-Based Conversion Varnish
Enduro Water Based Stain Blocker Primer
Enduro Water-Based Tintable 2K White Poly
Enduro Water-Based Pro Series White Polyurethane
Hard Wax Oil & Hardener
Gel Stains
Water-Based Wood Stain
Pro Image Flooring Topcoat
Jen Poly Brushes
Stir Stix
Ultraflex Softback Sanding Sponge
