Vintage Paints & Plasters
Vintage Paints & Plasters
1050 San Jose Avenue
#106
Clovis, CA 93612
United States
Vintage Paints & Plasters
1050 San Jose Avenue
#106
Clovis, CA 93612
United States
Our first concern is the use of the epoxy. Although you have may had success with this process previously, we do not recommend the use of Enduro-Var with epoxy or any oil based products. Enduro-Var works well on its own or with GFs water based finishes. There is a great possibility that future finishes can fail.
First, test your surface to get a sense for the color present in the wood. To do this, wipe the surface down with mineral spirits (if you are expecting to use an oil finish) or plain water (if you are expecting to use a water based finish). See the following GF video demonstration for a better understanding of this process.
Next, apply product. Here are two recipes for a lightly stained look:
Never use steel wool with water based finishes because the particles can become embedded into your project and rust. Klingspor Synthetic Wool and Mera MIrlon 1500 synthetic wool are great alternatives.
Steel Wool is still an acceptable option for oil based finishes. Liberon 0000 Steel Wool is a good choice, as it does not shred as easily as the hardware store brands.
ROUGH, DRY SURFACE
This is called dry spray. You may have sprayed too lightly.
Re-sand the finish with 320-grit sandpaper and apply a heavier coat. Keep your gun at 6-8" from the surface.
GF recommends using the least expensive product that will provide the needed performance characteristics. We offer a range of products designed for professional spray applications and brush-on finishes for consumer use.
General Finishes offers a complete coatings system with a finish for every objective.