Enduro Tintable 2K Clear Poly

General Finishes offers a complete coatings system with a finish for every objective.

General Finishes Professional, Industrial, and OEM Water-Based Topcoats

• Enduro Professional Tintable 2K Clear Poly
• Enduro Professional Tintable 2K White Poly
• Enduro Professional 2K Conversion Varnish
• Enduro Professional 1K White Poly
• Enduro Professional 1K Clear Poly
• Enduro Professional Pro Series Clear Poly
• Enduro Professional Pro Series White Poly
• Enduro Professional Pre-Cat Lacquer

General Finishes Retail Water-Based Topcoats:

• High Performance Topcoat
• Flat Out Flat Topcoat
• Enduro-Var II Topcoat
• Exterior 450 Topcoat
• Wood Turners Finish

General Finishes Exterior Water-Based Topcoats:

• Enduro Professional Tintable 2K Clear Poly
• Enduro Professional Tintable 2K White Poly
• Enduro Professional 2K Conversion Varnish
• Exterior 450 Topcoat
• Exterior 450 White

General Finishes Oil-Based Topcoats

• Arm-R-Seal 
• Seal-A-Cell
• Gel Satin Topcoat
• Wood Bowl Finish
• Butcher Block Oil
• Outdoor Oil
• Hard Wax Oil 

GENERAL PRACTICE:

1. Oil-based topcoats and ENDURO-VAR II will amber over time.
2. All other water-based and High Performance top coats dry clear.
3. Never use any water-based topcoat with long oils such as Danish, Tung or Linseed.
4. Water-based top coats clean up with soap and water. Oil-based topcoats require mineral spirits for cleanup.
5. If you use water-based topcoats over oil-based finishes, make sure that you wait 72 hours between the two products. It is essential to let the oil finish dry longer.
6. For more complex projects with many details and corners or large surface areas such as cabinets, we recommend either ARM-R-SEAL liquid oil-based topcoats or water-based topcoats. Large surfaces such as cabinets or tables and complex projects with lots of detail are easier to cover with a liquid topcoat rather than a GEL SATIN topcoat.
7. Enduro Professional Topcoats are thinner and intended to be sprayed
8. HIGH PERFORMANCE can be brushed or sprayed. It can be thinned by adding 5-10% distilled water if needed. 

Compare all topcoats

A high-performance 2K coating has a base specifically formulated to be catalyzed with Isocyanates to crosslink the polymer fully. This catalyst provides superior performance over 1 K coatings that have been hardened with PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K; General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world. These new coatings are engineered to prevent the biggest frustrations for today's professional, industrial and OEM users providing ultimate durability for interior/exterior use. General Finishes goes hard for great chemistry, so you don't have to worry when your clients are tough on the paint. Paired with Tintable 2K Clear Poly, you have a dynamic duo of 2 component finishes, the most durable interior/exterior coatings General Finishes has ever created. You can apply confidently, knowing that you are giving your customer the best the industry offers. Perfect for new or remodeled cabinets, furniture, woodwork, pre-primed steel, fiberglass, and exterior projects. Made in the U.S.A.

KEY FEATURES

1. Ease of application. Whether in a shop or on-site, Enduro 2K is designed to flow and level for Professionals/Industrial users that apply with AAA, HVLP, Airless, or flatline systems.

2. Tintable to any major manufacturer's color deck. Enduro 2K hits the deepest darks, the bright whites, and everything in between. General Finishes recommends ColourFal Zero colorants.

3. Higher gloss standards for white and clear, with 90+ degrees on a 60-degree angle.

4. Fast production time: You can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Enduro 2K cures for use in 5 days.

5. Fast film build: Enduro 2K'S are engineered with a combo of larger and smaller-sized resin particles, which, when combined with the catalyst, allows for a thicker, quicker film build than any 1K. It provides a better vertical hang when spraying built-in surfaces on-site, with fewer drips or sags.

6. Water and chemical resistance: Combining our new resin with catalyzation allows Enduro 2K to hit a commercial level of water and chemical resistance that *exceeds industry requirements and guidelines”. This is the perfect coating to stand the test of time on Wisconsin bar tops.

7. Excellent adhesion properties on properly cleaned and prepped wood, plastics, fiberglass, and pre-rimed steel. (It Sticks).

8. Exterior use: This new finish has an unusual balance of durability and flexibility, making it the professional’s choice for outdoor projects such as doors, benches, furniture, and tables. Do not use on deck surfaces.

9. Consistency. General Finishes prides itself on superior quality control to meet and exceed the customer’s expectations.

Available in Flat, Satin, Semi-gloss, and Gloss

General Finishes industrial/professional Enduro Water-based Tintable 2K coatings are ideally qualified for OEM (Original Equipment Manufacturing) production, which requires functional properties that are essential to the performance and durability of industrial, transportation, and durable consumer products. In addition to our line of stock Enduro finishes, General Finishes can custom-make coatings for your specific OEM objectives.

If you have interest, inquire here to be contacted by a rep: We currently provide coatings and finishes for the following markets:

• Wood Flooring
• Kitchen Cabinets
• Windows, Doors, and Millwork
• Furniture
• Specialty Wood Applications
• Windows, Doors, and Millwork
• Pre-primed Steel, Plastics, and Fiber Glass

General Finishes offers 6 stock water-based coatings in the OEM market space:

1. Enduro Tintable 2K White Poly
2. Enduro Tintable 2K Clear Poly
3. Enduro 2K Conversion Varnish
4. Enduro Clear 1K Poly
5. Enduro Pre-Cat Lacquer
6. Enduro RTM Stains

Our newest addition, Enduro Tintable 2K White Poly and Tintable 2K Clear Poly, offers the following features and functionality:

1. Ease of application. Whether you’re in a shop or on-site, Enduro 2K was designed to flow and level for users applying with AAA, HVLP, Airless, or flatline systems.
2. Tintable to any major manufacturer's color deck. Enduro 2k hits the deepest darks, the bright whites, and everything in between.
3. Higher gloss standards for white and clear, with 90+ degrees on a 60-degree angle.
4. Fast production time: You can spray 3-4 coats of Enduro 2K and sand in between coats in one day. Enduro 2K cures in 5 days.
5. Fast film build: Enduro 2k is engineered with a combo of larger and smaller-sized resin particles, which, when combined with the catalyst, allows for a thicker, quicker film build than any 1k. It provides a better vertical hang when spraying built-in surfaces on-site, with fewer drips or sags.
6. Water and chemical resistance: Combining our new resin with catalyzation allows Enduro 2k to hit a commercial level of water and chemical resistance that *exceeds industry requirements and guidelines”. This is the perfect coating to stand the test of time on high-use projects.
7. Excellent adhesion properties on properly cleaned and prepped wood, plastics, fiberglass, and Pre-Primed steel. (It Sticks).
8. Exterior use: This new finish has an unusual balance of durability and flexibility, making it the choice for outdoor projects such as doors, benches, furniture, and tables. Do not use on deck surfaces.
9. Consistency. General Finishes prides itself on superior quality control to meet and exceed the customer’s expectations.

Available in Flat, Satin, Semi-gloss, and Gloss