Site Search Results

Water-Based Pre-Stain Conditioner is a formula similar to our water-based stains without the colorant. Before applying a water-based wood stain, use General Finishes Pre-Stain Conditioner Natural to control blotching on hard-to-stain woods, such as maple, pine, and cherry.

Pre-Stain Wood Conditioner with an oil-based stain is designed for use before staining new, soft, and porous wood surfaces, such as aspen, cherry, birch, poplar, or pine.

Maple is one of the most difficult woods to achieve a dark, uniform stain color on because it is a dense, closed grain wood and often absorbs stain very unevenly. General Finishes Gel Stains or Water Based Stains usually will perform very well because they are more topical than traditional liquid oil stains, and contain more colorants. 

General Finishes offers a complete line of oil based, water based and wax products. Application techniques differ between oil based products and water based products.

General Finishes Water Based Stains have superior qualities over oil-based stains. Their high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine.

General Finishes water-based Enduro Pre-Cat Lacquer clear-drying wood finish uses new technology in the polymer manufacturing process. This unique formula produces a smaller and smoother particle, translating into a big increase in film clarity.

You can design your own custom glazes, stains, washes, and varnishes with General Finishes intermixable water-based products. **Do not mix General Finishes Glaze Effects with General Finishes Water Based Stain (including Pre-Stain Natural) See tips and recipes below.

For all of the following mixes, GF recommends the following two steps:

Water-based Dye Stains penetrate deep into the wood to beautifully magnify the grain. This low VOC stain will provide your project with more depth and color vibrancy than any other wood stain.

There are several reasons to choose Dye Stain. Here are a few.

Relevant Documents