Site Search Results

General Finishes has released it's next video!  Watch as Tom Monohan and Chris Adams of General Finishes take a raw pine bench from plain and boring to spectacular!

In this video, Tom and Sheryl Monahan of General Finishes show how to refresh existing oak cabinets with General Finishes Brown Mahogany

Hand Application of General Finishes Water Based Wood Stains

  • Always stir the contents well.

In our newest video, Chris Adams and Tom Monohan of General Finishes show you how to apply GF Waterbased Topcoat to a bench. 

General Finishes Water Based Stains have superior qualities over oil-based stains. Their high-quality pigments produce rich, dark, uniform colors on hard-to-stain woods like maple and pine.

GF's Exterior 450 Stains are low VOC premium quality, exterior pigmented water-based wood stains designed for outdoor projects with vertical surfaces such as garage doors, entrance doors and furniture. Can be applied to wood, MDF, and fiberglass.

It is normal to see a bit of stain on the brush when applying the first coat of topcoat. Topcoats often pull a bit of color on the first pass, but good preparation will minimize this.

To prepare open grains woods such as raw Oak for a water-based stain, we recommend sanding with 180-grit followed by no more than 220-grit sandpaper.

Gel Stain gets its deep rich hue from a large amount of colorants. Seal the stain with a topcoat before applying glaze to prevent "color pull" when applying glaze.

Water-Based Pre-Stain Conditioner is a formula similar to our water-based stains without the colorant. Before applying a water-based wood stain, use General Finishes Pre-Stain Conditioner Natural to control blotching on hard-to-stain woods, such as maple, pine, and cherry.

It's a wrap! General Finishes next round of tutorial videos are on their way! We will be releasing one per week for the month of November so stay tuned.

Relevant Documents