Oil Based Gel Urethane Topcoat

Gel Topcoat Satin from General Finishes

Although Gel Stains do contain urethane, Gel Topcoat has a higher content of urethane and may be used to topcoat Gel Stains for more protection.

Gel Topcoat is available in satin. For semi-gloss or gloss sheens, use Arm-R-Seal Topcoat.

Need some inspiration? Visit the General Finishes Design Center or Pinterest Board for gel topcoat ideas.

Brochures/Instructions

Gel Topcoat Satin is a heavy duty oil and urethane oil base top coat, which produces a beautiful hand rubbed quality finish. Gel satin is a thicker consistency, so there's no drips, runs or spills.

  • Sheens: Satin
  • Color tone: Warm amber tone
  • Application: Wipe on with a cloth, Natural bristle brush, foam brush, paint pad applicator
  • Recoat: 12-24 hours
  • Cleanup: Mineral Spirits
  • Coverage: 200 sq. ft/qt
  • Coats: Minimum 3 coats, additional coats can be applied
  • Sanding: On bare wood sand to 150 or 180. Can be wet sanded into the wood using 400-600 grit. Wipe off excess after sanding.
  • Sealer: General Finishes Seal A Cell Clear, oil base Pre-stain Natural Conditioner, or can be used as a self sealing finish on it's own on bare wood or stripped surfaces.
  • Use: Interior Use only
  • VOC: < 550 grams/liter


Recommended uses: Windows, bookcases, wall shelves, furniture, toys, tables, dressers, stools, millwork, doors, floors.

WARNING: TEST FOR COMPATIBILITY WHEN USING THIS PRODUCT WITH PRODUCTS FROM OTHER BRANDS. General Finishes products should be tested to your complete satisfaction before using. General Finishes will not be responsible for any failure if our products are used in conjunction with other brands of finishes. We do not test General Finishes products with those of another manufacturer and will not accept liability if there is a compatibility issue.

WATER SPILLS AND DAILY USE: Clean water spills up as they occur during regular use and protect from heat. Although General Finishes products are water resistant, they are not impervious to water. Surfaces will not be damaged by spilled water so long as it is cleaned up promptly. We recommend using coasters to protect your wood from standing water and pot holders to protect from heat.

SDS

Technical Data Sheets
Safety Data Sheets