America's Leading Manufacturer of Innovative Water-Based Wood Finishes

Orange Oil Furniture Cleaner & Polish

Orange Oil is General Finishes' most popular natural furniture care product. It is non-combustible with a fresh orange scent.  Use as a cleaner, for antique restoration or as a lubricant when buffing topcoats. Orange Oil does a superb job of removing everyday dust and dirt on cured clear topcoats or dark-painted surfaces. Do not use over white or light colors as it has a slight amber tone. 

Download 2024 Retailer All Products Catalog here

Find A Store Compare Similar Products
General Finishes Oil Based Orange Oil Furniture Polish, 16 oz Bottle

Instructions

How To Apply General Finishes Orange Oil

Join General Finishes University Facebook Group at https://www.facebook.com/groups/generalfinishesuniversity for customer support and learning opportunities for GF products. This group is a great resource for guidance regarding choosing the right product, mastering finishing techniques, troubleshooting, or sharing your finished projects.

Note: Orange Oil is great for routine cleaning of clear topcoats or dark-painted surfaces. Do not use over white surfaces.

General Finishes Orange Oil Application Steps

Application for Cleaning: 1. Apply with a clean, soft cloth. 2. Wipe off the excess evenly with the grain. 3. Repeat as needed.
 

Polishing/Buffing:

  1. Shake container well.
  2. Wipe on a thin, even coat with a clean cloth.
  3. Let sit 1-2 minutes.
  4. Buff off the excess with a buffing or sanding pad (see below) in the direction of the wood grain. The higher/finer grit you use, the easier it will be to achieve a high-gloss finish.
  5. Buffing Tools:
    1. Norton Abrasives, Yellow Block
      • 1000-grit, 1500-grit, 2000-grit
      • Creates a high-gloss finish
    2. Klingspor Fusion Pads
      • 2800- to 3500-grit
      • Ideal for painted and gloss finishes
    3. Klingspor Superfine Sanding Pad
      • 220-grit
      • General purpose option for rubbing out topcoats and paints with a flat or satin sheen.
    4. Merka Mirlon Pads
      • Total 1500 (gray)
      • Total 2500 (gold)
      • Ideal for oil-based finishes or between coats of paint

Removing Scratch Marks:
See video tutorial on How To Repair a Scratch
Do not sand "dry-on-dry" to remove scratch marks. Add Orange Oil to the sanding pad AND on the surface of your project, then spread smooth with a rag.

Storage of Maintenance Products

Life of Product
Maintenance products are best used within 1 year of the manufacture date listed on the bottom of the can. The following best practice will increase the life of your product:

Store in moderate temperatures of 50-100°F/10-38°C. Heat-damaged product cannot be revitalized. Temperature-controlled spaces, such as a basement, are ideal for storage. Do not store product in an attic, garage, in direct sunlight, or next appliances with heat or flame such as a furnace.

Warnings and Warranties

Compatibility: Do not use water-based products with Linseed Oils or Danish Oils.

Limited Warranty
General Finishes products must be tested to your complete satisfaction before using. General Finishes will not be responsible for color satisfaction, misapplication, nor compatibility with other manufacturers' products. General Finishes will be responsible only for the cost of our products, and not for costs such as labor, damage or project replacement. 

Contamination and Compatibility
Our finishes are engineered as a system and are compatible with each other. General Finishes cannot guarantee an ideal refinish when applying our products on top of or combined with another company's products or over surfaces that have been in contact with waxes, polishes or sprays containing contaminants such as silicone. Test for adherence and aesthetics before beginning. 

Disposal: Discard unused product and waste in an environmentally safe manner; check with local fire and health regulations.

CAUTION: Contains ALIPHATIC HYDROCARBONS. VAPOR HARMFUL. Use only with adequate ventilation. DELAYED EFFECTS FROM LONG-TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating & inhaling the contents can be harmful or fatal.

Warning
If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to control lead exposure. Clean up carefully with a HEPA vacuum and a wet mop. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log onto www.epa.gov/lead.

Keep out of reach of children. Do not swallow. Do not get on skin or clothing. Avoid contact with eyes. Keep container tightly closed when not in use. Wash thoroughly after handling.

FIRST AID: Seek immediate medical attention if symptoms occur due to the following. EYE CONTACT: Remove any contact lenses. Flush eyes with water for 20+ minutes while lifting upper and lower eyelids. SKIN CONTACT: Flush skin with water. Remove contaminated clothing and shoes and clean before reuse. INHALATION: Move to fresh air. Loosen tight clothing. If not breathing, if breathing is irregular, or if respiratory arrest occurs, trained personnel should provide artificial respiration or oxygen. INGESTION: Call physician immediately. Wash out mouth with water. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. 

Warning
This product contains a chemical known to the State Of California to cause cancer and birth defects. Do not swallow; first aid: drink water to dilute product. May cause eye or skin irritation; first aid: flush eyes thoroughly with water.

Specifications

Basic Features
Product Colors Clear
Base Type Oil
Interior or Exterior Interior only
Type Polish/Cleaner
Application
Application Method Wipe on with clean rag (use over cured topcoat only)
Usable over existing finishes Yes
Dry Time
Dry Time - Recoat No dry time required between coats.
Dry Time - Cure N/A
Contents
Can Sizes 16 oz. bottles
Technical Data
VOC US VOC
78.252 g/L

Compare Maintenance Products

General Finishes Orange Oil

Have Questions?

Visit Our Product FAQs

test

SDS/TDS

Videos

FAQs

Orange Oil Furniture FAQs

*Can I Use Orange Oil To Rub or Buff a Finish To a High Gloss?

Rubbing or Buffing out a Finish:

  1. Shake container well.
  2. Wipe on a thin, even coat with a clean cloth.
  3. Let sit 1-2 minutes.
  4. Buff off the excess with a buffing or sanding pad (see below) in the direction of the wood grain. The higher/finer grit you use, the easier it will be to achieve a high-gloss finish.
  5. Buffing Tools:
    1. Norton Abrasives, Yellow Block
      • 1000-grit, 1500-grit, 2000-grit
      • Creates a high-gloss finish
    2. Klingspor Fusion Pads
      • 2800- to 3500-grit
      • Ideal for painted and gloss finishes
    3. Klingspor Superfine Sanding Pad
      • 220-grit
      • General purpose option for rubbing out topcoats and paints with a flat or satin sheen.
    4. Merka Mirlon Pads
      • Total 1500 (gray)
      • Total 2500 (gold)
      • Ideal for oil-based finishes or between coats of paint

Related Categories

*How Do I Remove Loose Fibers That Got Caught In My Last Coat of Arm-R-Seal?

You can lightly buff with 0000 steel wool and General Finishes Orange Oil Furniture Polish - nothing too aggressive.

Related Categories

*How Should I Clean My Finished Project?

After your finish has cured, the best way to clean is with a water-damp rag. If your surface requires deep cleaning due to grease or grime build-up, add a speck of a strong dish detergent, such as Dawn or a bit of vinegar to your damp rag.

If need deeper cleaning, use General Finishes Orange Oil Polish.

Avoid using oil-soap or silicone-based daily cleaners or dusting sprays These products and the chemicals in other cleaners can contaminate your finish, preventing adhesion of future finishes. 

NOTE: Do not clean furniture until the finish has cured completely. 

Cure Time Guidelines: 

  • Water Based Finishes: 21 days
  • Oil Based Finishes: 30 days 

Related Categories

What Finishes & Coatings does General Finishes Offer for Retailers, Homeowners and DIY??

General Finishes offers water, oil, and maintenance finishes that meet the needs of homeowners, woodworkers, and DIY’ers. Comprehensive videos are available for each product on YouTube, plus dynamic comparison charts at GeneralFinishes.com/COMPARE.

All General Finishes water-based finishes are:

  • VOC compliant in all 50 states
  • Water cleanup 
  • Low odor
  • Non-flammable
INTERIOR PRIMERS

Water Based Stain Blocker is:

  • An epoxy acrylic formulation.
  • Prevents tannin bleed-through & discoloration.
  • Has high build with excellent adhesion properties.
  • Apply with a brush, roller, or sprayer.
WATER-BASED TOPCOATS & PIGMENTED FINISHES

High Performance Water-Based Topcoat is:

  • An Interior polyurethane/acrylic blend.
  • Clear drying.
  • highly resistant to water and household chemicals.
  • Apply with a brush or sprayer.

Flat Out Flat Water-Based Topcoat is:

  • An interior acrylic formulation.
  • Clear drying.
  • provides an extremely flat finish with high durability.
  • Apply with a brush or sprayer.

Enduro-Var II Water-Based Topcoat is:

  • An interior oil-modified water-based urethane.
  • Dries to a light, amber tone.
  • Made with over 50% renewable resources.
  • Apply with a brush or sprayer.

Water-Based Milk Paint is:

  • A premium interior and exterior-rated acrylic formulation.
  • Self-sealing and does not require topcoat.
  • Is made with over 50% renewable resources.
  • Is available in 12 popular colors, plus two tint bases.
  • Apply with a brush, roller, or sprayer.

Water-Based Glaze Effects is:

  • An interior oxidating acrylic formula.
  • Available in 6 colors, including a Clear Base.
  • Is a decorative specialty finish.
  • Can be intermixed to create custom colors.
  • It requires a topcoat
  • Apply with a brush, roller, or sprayer

Pro Image Water-Based Flooring Topcoat is:

  • An interior polyurethane.
  • Clear drying.
  • Levels to a smooth, hard, durable finish.
  • Provides excellent slip and black heel mark resistance.
  • Apply with a brush, roller, or pad applicator.
INTERIOR WATER-BASED STAINS

Water-Based Wood Stain is:

  • Made with over 50% renewable resources.
  • It’s available in 18 deep brilliant colors.
  • And provides universal coverage on many wood species.
  • Apply with a brush or sprayer.

Water-Based Pre-Stain Conditioner is:

  • Used to control blotching on hard-to-stain woods.
  • And to reduce Water Based Wood Stains.
  • Apply with a brush or sprayer.

Water-Based Dye Stain is:

  • A penetrating stain with ink-like consistency.
  • It is available in 14 vibrant colors.
  • And can be used as a toner.
  • Apply with a brush or sprayer or wiping on.

Water-Based Dye Stain Reducer is:

  • The clear base used to reduce Dye Stain colors.
WATER & OIL EXTERIOR FINISHES

Exterior 450 Clear Water-Based Topcoat is:

  • A polyurethane formulation.
  • Tintable to dark colors.
  • Contains UV absorbers & Mildewcides to protect the finish.
  • Clear drying.
  • Apply with a brush or sprayer.

 450 White Water-Based Topcoat is: 

  • A pigmented polyurethane formulation.
  • Is tintable to light and pastel colors.
  • Contains UV absorbers & mildewcides to protect the finish.
  • Apply with a brush, roller, or sprayer.

Exterior 450 Water-Based Stain is:

  • Made with over 50% renewable resources.
  • Available in 10 colors, including a clear base.
  • Contains U.V. absorbers & mildewcides to protect the finish.
  • Apply with a brush or sprayer.

Water-Based Milk Paint is:

  • A premium Interior and exterior-rated acrylic formulation.
  • Self-sealing and does not require topcoat.
  • Made with over 50% renewable resources.
  • Available in 12 popular colors, plus two tint bases.
  • Apply with a brush, roller or sprayer.

Outdoor Oil is:

  • A penetrating oil wood preservative.
  • Contains UV absorbers and mildewcides to protect the finish.
  • This finish will amber as it ages.
  • A maintenance product. Reapply when wear becomes evident.
  • Apply with a brush, roller or sprayer.
INTERIOR OIL STAINS & AMBERING TOPCOATS

Gel Satin Oil-Based Topcoat is:

  • A heavy-bodied, no-drip oil and urethane formula.
  • Designed to provide a hand-rubbed look.
  • Will amber as it ages.
  • Apply with a brush or wipe on.

Gel Oil-Based Stain is:

  • A heavy-bodied, no-drip formula.
  • Available in 14 deep, rich, uniform colors.
  • Apply with a brush, roller, or wipe on.

 Arm-R-Seal Oil-Based Topcoat is:

  • A penetrating sealer with a high-quality urethane formulation.
  • It provides long-lasting, durable protection.
  • and works beautifully on projects with detail.
  • This finish will amber as it ages
  • Apply with a brush or wipe on.

Liquid Oil-Based Wood Stain is:

  • a traditional, pigmented liquid wiping stain
  • Available in 14 colors
  • Can be used as a toner with Arm-R-Seal
  • Apply with a brush or wipe on.

Oil-Based Pre-Stain Conditioner is:

  • Designed to control blotching on hard-to-stain woods.
  • And penetrates the grain to promote uniform acceptance of oil stains.
  • Apply with a brush or wipe on.

Oil-Based Seal-A-Cell Clear is:

  • Formulated with a blend of oils, urethanes, and wax.
  • Is GF’s deepest penetrating close-to-the-wood sealer.
  • And the best choice for highlighting figured wood.
  • Apply with a brush or wipe on.

Hard Wax Oil is:

  • A urethane-solids polymer in a blend of oil & wax.
  • Enhances the natural look of wood.
  • One of our easiest finishes to use.
  • It’s best used with optional GF Hardener to shorten dry time and provide superior durability.
  • This is a maintenance product. Reapply when wear becomes evident.
  • Apply with a white pad or plastic spreader.

 Oil Based Wood Bowl Finish is:

  • A pure urethane formulation.
  • Highlights figured wood beautifully
  • Apply with a brush or wipe on.
INTERIOR MAINTENANCE PRODUCTS

Butcher Block Oil is:

  • A mineral oil formulation.
  • Meets all requirements for use on wooden surfaces that come in contact with food.
  • This is a maintenance product. Reapply when wear becomes evident.
  • Apply with a cloth.

Orange Oil is:

  • A routine cleaner for cured wood finishes
  • Non-combustible with a fresh orange scent
  • Apply with a cloth

Satin Finishing Wax is:

  • A blend of waxes.
  • Produces a soft sheen and feel over any wood finish.
  • Can be used as a polish for rubbing out new finishes OR as a scratch-remover.
  • Apply with a cloth.

No matter what your project is, General Finishes has the right product for you. General Finishes is dedicated to using the highest-quality ingredients in all our products, while testing and advancing our water-based finishes with leading-edge technology.

Learn more about GF’s products at Generalfinishes.com. 

General Finishes: We make tomorrow's finishes today.

 

Related Categories

Related Products