General Finishes Glaze Effects

Glaze Effects are translucent water based colors used to create beautiful decorative finishes such as distressing, marble, shabby chic, burnishing, color washing, rag rolling and wood graining.

Glaze Effects can be inter-mixed or layered to create custom colors. They may also be layered over one another to create deeper, richer looks.

Need some inspiration? Visit the General Finishes Design Center OR Pinterest Board for Glaze Effects ideas.

Colors


Burnt Umber

Pitch Black

Red Sienna

Van Dyke Brown

Winter White

Yellow Ochre

The examples above are all over Antique White Milk Paint.

The digitized colors shown are for reference purposes only. Always test stain on a hidden area to verify desired color.

Brochures/Instructions

Application Brochures

Visit our FAQs page for answers to all your Glaze Effects questions!

APPLYING GLAZE EFFECTS

  • Apply glaze liberally using an acrylic bristle brush, poly foam brush, Handi-Painter applicator, or spray it on using a HVLP 2.0 needle.
  • If finishing a large area, add GF Extender to give you more open time to wipe glaze off.
  • Another option is to apply a coat of High Performance Topcoat before you glaze - this will give your more control in low humidity situations.
  • Work glaze over entire area and into deep nail holes with a poly foam brush.
  • Wipe off excess with absorbent paper towel. Let dry 1-2 hours before applying a top coat. 
  • We recommend adding a total of 3-4 coats of High Performance Top Coat on your project. Therefore, if 1-2 coat of top coat was applied before glaze, then we recommend adding at least 2 more coats over the glaze. 

WARNING: TEST FOR COMPATIBILITY WHEN USING THIS PRODUCT WITH PRODUCTS FROM OTHER BRANDS. General Finishes products should be tested to your complete satisfaction before using. General Finishes will not be responsible for any failure if our products are used in conjunction with other brands of finishes. We do not test General Finishes products with those of another manufacturer and will not accept liability if there is a compatibility issue.

SDS

Technical Data Sheets
Safety Data Sheets