Site Search Results

Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry.

Yes! But you must follow a few simple rules to be sure you achieve the best possible finish.

GF advises extra care and prep when applying any finish over laminate surfaces because they are specifically designed not to mar and therefore they are not very "sand-able", making adherence difficult.

In addition to this non-permeable surface factor, General Finishes Gel Stain is an oil-based product, and it is more difficult to obtain proper drying characteristics over a dense manufactured surface such as laminate. Gel stains, as all wood stains, were formulated to go over raw wood which has an "open" surface and can absorb some of the stain.

Oil based top coat can be applied over Milk Paint so long as 24 hours wait time is allowed between the two products. When moving from a water based product to an oil based product it is essential that the first is dry before applying the second.

Now more than ever, water-based stains offer a viable alternative to oil-based and other solvent-based stains.

Water-based stains penetrate deeper into wood than oil-based stains, resulting in deep, rich colors in only one coat. Manufacturers, professionals, and DIY users moving away from solvent-based products to water-based systems find immediate advantages...

It is normal to see a bit of stain on the brush when applying the first coat of topcoat. Topcoats often pull a bit of color on the first pass, but good preparation will minimize this.

To prepare open grains woods such as raw Oak for a water-based stain, we recommend sanding with 180-grit followed by no more than 220-grit sandpaper.

As seen in Green Building and Design Magazine.

BY HAILEY HINTON, GREEN BUILDING AND DESIGN MAGAZINE

Water-based coatings are the future of finishing. You may not be using them today, but you will be in the next five years.