Site Search Results

Vinyl or paper veneers can be often found on the end returns of lower price-point cabinets. We cannot guarantee that our paints will adhere well to a paper veneer - we have no idea what the actual material is or what adhesives were used to apply the veneer to the surface. The resins and additives in our paints may break down the adhesives used for the veneer.

And Milk Paint does NOT adhere to vinyl.

While Gel Stain can be applied over an existing finish, it was originally engineered for raw wood surfaces. We prefer applying the Gel Stain over a slip coat of mineral spirits instead of topcoat as shown in this video, "How to Apply Gel Stain to Raw Wood"

Brushable White Enamel can be applied to raw wood or existing finishes. When applying over an existing finish, be sure to prep your surface properly.

Learn how to properly prep existing finishes by watching this video.

There is no easy solution to this problem. General Finishes Milk Paint has strong adhesion properties but there are several reasons this finish could fail:

A primer is your best defense under light-colored paint.

Another technique to avoid the slight color change that sometimes occurs when applying topcoat is to add 10-15% of the paint you are using to your topcoat. This technique layers additional coats of color over your piece as well as providing the protection of a topcoat. If you don't like measuring, just add enough paint until you can see a bit of the hue in the topcoat. This method works with a brush or a spray gun.

To maintain the full-strength protection of the topcoat, DO NOT TINT YOUR FINAL COAT of topcoat.

Yes, but it will evaporate much more quickly so you will need to re-wet the discharge pad more frequently.

See the video below for how to update existing finishes using a dry brush technique.