Extender is a wetting additive used to improve flow and leveling and slow the drying time of any water-based stain, topcoat or glaze, which is helpful in hot, dry conditions.
Accelerator is an additive that decreases dry time of General Finishes water-based products, which is helpful in humid conditions where dry time is normally extended. Available in gallons and 16 ounce sizes.
Check out this mention of General Finishes's Enduro Extender in Family Handyman Magazine, July/August 2013. Thanks for the shout-out, familyhandyman.com.
Water-based products do not last forever, even when unopened. General Finishes products are best used within 1 year of the manufacture date listed on the bottom of the can. The life of the product may be extended to 2-3 years with proper care and storage.
Thin GF water based stains with distilled water if desired. Start with 5%, adding up to 10% by volume.
Increase open time, if needed with up to 5% General Finishes Extender if allowed by local regulations. GF Extender will improve flow and leveling and increase open time, which is helpful in dry climates.
Ideal Conditions are 70 degrees F and 50% humidity. Refinishing furniture in a space that is below or above the 65-75 degrees F range can lead to problems, and a space below 55 degrees F is definitely too cold.
One issue caused by cold temperatures with water-based topcoats is the development of dimples in the finish called Orange Peel.
Keep that bronze, sun-kissed look all year with Bronze Pearl Effects!
General Finishes water-based Enduro Pre-Cat Lacquer clear-drying wood finish uses new technology in the polymer manufacturing process. This unique formula produces a smaller and smoother particle, translating into a big increase in film clarity.
Glamorous style isn't just for Hollywood!
No. General Finishes already adds excellent wetting and flow agents to our Milk Paint. Adding another wetting agent is superfluous, and it may even be harmful to your finish if the formulas don't coordinate.