Site Search Results

General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.

Haze (the technical term is blush) is caused by too many coats applied too quickly. A recoat time of 12 hours is not enough dry time when applying over an EXISTING finish. To remove the blush or haze, you can either wipe the area with a strong solvent, like xylene or lacquer thinner, or you can try sanding out the haze and then reapply the topcoat.

General Finishes industrial/professional Enduro Water-based Tintable 2K coatings are ideally qualified for OEM (Original Equipment Manufacturing) production, which requires functional properties that are essential to the performance and durability of industrial, transportation, and durable consumer products. In addition to our line of stock Enduro finishes, General Finishes can custom-make coatings for your specific OEM objectives.

A high-performance 2K coating has a base specifically formulated to be catalyzed with Isocyanates to crosslink the polymer fully. This catalyst provides superior performance over 1 K coatings that have been hardened with PolyAzuradine or Carbodiiamide. To create Enduro Tintable 2K; General Finishes tested over 30 polymers, resins, and other ingredients sourced from around the world.

Superior water-based Enduro Tintable 2K Polys made in Wisconsin for professional, industrial, and OEM users. We hope you try it out; you’ll like it.

After your finish has cured, the best way to clean is with a water-damp rag. If your surface requires deep cleaning due to grease or grime build-up, add a speck of a strong dish detergent, such as Dawn or a bit of vinegar to your damp rag.

If need deeper cleaning, use General Finishes Orange Oil Polish.

GF recommends using the least expensive product that will provide the needed performance characteristics. We offer a range of products designed for professional spray applications and brush-on finishes for consumer use.

Compare all GF Topcoats Here