Site Search Results

General Finishes Pro Image Flooring Topcoat is a single-component urethane for interior hardwood floors. It is a VOC compliant, water clean-up, clear drying, durable, self-cross-linking urethane/acrylic, making it a leader among single-component technologies.

Three features differentiate flooring topcoats

  1. General Finishes flooring topcoat, Pro Image, is fortified with significantly more urethane to increase durability.
  2. The slip rate of flooring topcoats is higher to improve floor safety and reduce the likelihood of slipping; approximately a 5.7 rating. For example, someone in socks is less likely to slip on a flooring finish, or a basketball player is less likely to slip on a good professional floor finish.

General Finishes Enduro Pro Series White Polyurethane is a single-component self-cross linking polyurethane/acrylic topcoat designed for fast build with 2-coat hide capability.

General Finishes Enduro Pro Series Clear Polyurethane is a single-component, self-cross linking polyurethane/acrylic topcoat designed for fast build with excellent flow and leveling. Priced competitively for the professional and industrial markets, Pro Series Clear is tintable and me

Water-Based Wood Stains from General Finishes

Now more than ever, water-based stains offer a viable alternative to oil-based and other solvent-based stains.

Water-based stains penetrate deeper into wood than oil-based stains, resulting in deep, rich colors in only one coat. Manufacturers, professionals, and DIY users moving away from solvent-based products to water-based systems find immediate advantages...

General Finishes Enduro line of water-based coatings is formulated for professional, industrial and OEM for operations. Comprehensive videos for each product are available on YouTube, and comparison charts at www.GeneralFinishes.com.

Tint General Finishes Milk Paint Clear or White base to match colors in major manufacturer's paint decks using Colorfal Zero VOC water soluble colorants.

General Finishes Pro Image Topcoat or Pro Shield Topcoat can be applied directly to the stain without a sealer.

In cases of species like White Oak top coats can pull tannin from the wood leaving an undesirable color affect. Many closed grain woods such as maple, walnut, and cherry may only require one seal coat and two finish coats. Most open grain woods such as the oaks and ash will need two seal coats to increase the build of the finish and improve the final result. If in doubt, put down a coat of sealer.

The hardness properties of a wood finish are formulated around the objectives of use. A hard finish is desirable on projects that get heavy wear such as kitchen cabinets or table tops.

But in other situations, such as an outdoor topcoat, a desired property of the finish is elongation, which allows the topcoat to expand and contract through different extremes of temperature.