Site Search Results

Yes! But you must follow a few simple rules to be sure you achieve the best possible finish.

Dry time is the recommended length of time between coats of product, often called recoat time, and cure time is the length of time recommended before subjecting your finished project to daily use. The following factors can influence your dry time:

General Finishes is proud and honored to be featured in the August 2015 issue of Woodworker's Journal.  Michael Dresdner, a nationally known finishing expert, highlights the advantagous of GF water based products in his article (below

Yes! But you must follow ONE simple rule to ensure the best possible finish: the underlying finish must be absolutely dry.

General Finishes offers a complete line of oil based, water based and wax products. Application techniques differ between oil based products and water based products.

Frozen High Performance Water Based Topcoat

Usually not but not all water based products respond the same way to a freeze. Most stains will be fine because freezing doesn't affect color. Some of the dyes will coagulate.

GF advises extra care and prep when applying any finish over laminate surfaces because they are specifically designed not to mar and therefore they are not very "sand-able", making adherence difficult.

In addition to this non-permeable surface factor, General Finishes Gel Stain is an oil-based product, and it is more difficult to obtain proper drying characteristics over a dense manufactured surface such as laminate. Gel stains, as all wood stains, were formulated to go over raw wood which has an "open" surface and can absorb some of the stain.

Our recommendation to fix white cabinets that have yellowed is to do a thorough sanding and precleaning and recoat with the following products:

General Finishes Arm-R-Seal Urethane Top Coat

Yes, they can, but be sure to stay within a manufacturer's finishing system and not mix product from different brands.

  1. In General Finishes line you can add up to 20% Gel Stain or Oil Base Stain to Arm-R-Seal to deepen the color for toning purposes.
  2. Simply stir the stain into the topcoat.
  3. Keep stirring during application as solids will settle very quickly when mixed into an oil urethane-based finish.
  4. Be sure to test in a hidden area before proceeding with your entire project.
General Finishes as Seen in Green Building and Design

As seen in Green Building and Design Magazine.

BY HAILEY HINTON, GREEN BUILDING AND DESIGN MAGAZINE

Water-based coatings are the future of finishing. You may not be using them today, but you will be in the next five years.

Relevant Documents